Set for carbines without a thread on a barrel of MEDIUM

Description

Very often hunting carbines do not have a thread for the installation of muzzle devices, if there is a desire to install or silencer, the solution is essentially one – to cut a thread on the barrel of the carbine.
Not many weapons workshops can do this correctly, so many shooters have doubts about the need for this procedure.

This kit avoids such operations with the barrel of the carbine!

It includes: MBC adapter + silencer, which is mounted on the MBC adapter. At the same time you get an effective muzzle brake compensator and silencer!

Each MBC adapter is made individually, according to the sizes of a trunk of your carbine!

This kit includes a silencer MEDIUM which is designed to work with calibers up to 300 Win Mag inclusive. Length of the muffler is 230 mm, Weight is 600 g. 10 conical chambers of an original design installed in the device.

To order a set, you need to measure the barrel of your carbine: the diameter of the barrel on the muzzle and 40mm. from the muzzle, below in the photo review is a diagram of the removal of dimensions from the barrel of the carbine.

All products of our company are covered by a warranty – 1 year or 1000 shots.

PLEASE NOTE: the adapter must go into the barrel at least 40mm. and rest on the slice of the barrel of the carbine. The collet should be located strictly at the bottom (for six hours). Tighten the screws on the collet. After that on the MBC adapter it is possible to wind a silencer.

For carbines up to 308 Win, it is possible, at the request of the customer, to make a shortened SHORT device (length 180 mm, weight 500 g, 6 cameras).

We do not recommend using chemical solvents for cleaning silencers. When using sound moderators in adverse weather conditions such as: rain, fog, sudden changes in temperature, we recommend drying the device (it is allowed to blow it with an air compressor) to remove liquid (water, condensate) from the body of the device. This will protect the silencer from corrosion and oxidation.

Each silencer has its own original serial number and product passport.

The manufacturer reserves the right to make changes to the external design of the device. If you have any questions about ordering a kit, call us.
REQUIRED FOR READING
RECOMMENDATIONS FOR CLEANING AND CARE
DELIVERY AND PAYMENT